11 Ways To Totally Block Your Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they do not rust or rot.

It is essential to clean and oil UPVC windows and doors regularly. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and even be fatal. It is important to take the time to make sure that you're doing all you can to ensure that your windows are in good repair.

Single-pane windows are relatively simple to replace, and they typically fit into old frames very easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the old panes. In this instance it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a drop cloth prior to when you start working on the glass to ensure that any fragments of glass fall onto the fabric rather than on the floor, where they could be trampled on and cause further damage.

It's a good idea to tape the gap once the glass has been removed. This will prevent drafts and water from entering your property until a professional is able to fix the window repair near me. This will also act as a barrier, preventing any intruders to gain access to your home. If the gap is large, you might want to consider using a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time they can suffer from a variety of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It's important to take action when you realize that your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window that is sliding. To do this, you'll have to open the window to get to the frame. After that, using a screwdriver, you can unscrew the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and verify the fit. If you are happy with the size of the window, you can tighten screws to keep them in the right position.

If you are unable to reposition the hinges you may require replacing the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to loosen. It is essential to replace your seal as quickly as you can to keep your upvc window repair window watertight and draughtproof.

uPVC handles may also become loose. This is typically caused by screws that have become undone over time, but it could also be due to the handle mechanism wears out. It's relatively easy to fix a loose uPVC handle. You'll first need to close the window and perform an experiment fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it's important to take action. The leaks of water from windows do can not only cause degrading of the structure of your home but also hinder your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue the caulking that was used up might need to be removed before a new layer of caulk can be applied. It is important to remember that when it comes to uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area harder to clean and could decrease the efficiency of your energy usage.

Check that any drainage holes are free of debris inside them and that the sill pan is angled correctly to drain away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely the issue is related to the seal, not the frame. This can be easily fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or it opens in an ease. They can be easily repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. It is an easy procedure, but it is easier when you have a person to help you hold the frame up.

Check that the uPVC hinges open and close in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused by opening the window incorrectly or due to a poor installation in the factory. Sending us photos via our website will often solve the issue. We are always happy to provide assistance.

Regularly lubricating the hinges is essential. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to open and close more easily. It can also lower the risk of a window sticking and help prevent corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. First, the hinges due to wear and tear can become misaligned, this will cause an opening to appear where the sash joins the frame. If they're beyond repair, it might be required to realign them. The interlock may be unbalanced. This is located on the hinge's side, and may need to be cleaned. In some instances it might be necessary to replace them.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the risk of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler that can be put on top of your window sill. These will help to block out cold air and keep your home warm and cosy!

The windows made of upvc can keep providing excellent insulation and security to your home with regular maintenance and repairs. However, it is important to recognise that windows last for a certain period of time and they may reach a point where it is more efficient to replace them than fix them. So, if you're having issues with your upvc windows, it is always recommended to seek help from a professional as soon as you can.